Rigid Metal Conduit (RMC)
South Conduit Rigid Metal Conduit (RMC) is galvanized steel tubing
with a tubing wall that is thick enough to allow it to be threaded.
A common staple in commercial and industrial construction,
South Conduit Rigid Metal Conduit is hot-dipped galvanized
inside and out. It is top-coated with a compatible organic
layer to inhibit white rust and increase corrosion resistance.
• Smooth defect-free interior and exterior
• Hot-dipped galvanized
• 10' length
• Custom lengths are available upon request
*Outside Diameter Tolerances:
+/- .005 in. (.13mm) for Trade Sizes 1/2" (16mm) through 1" (25mm)
+/- .0075 in. (.19mm) for Trade Sizes 1-1/4" (36mm) through 2" (53mm)
+/- 0.10 in. (.25mm) for Trade Sizes 2-1/2" (63mm) through 4" (103mm)
**Wall Thickness Tolerances:
+ 0.15 in. (.38mm) and - .000 for Trade Sizes 1/2" (13mm) through 2" (53mm)
+ 0.20 in. (.51mm) and - .000 for Trade Sizes 2-1/2" (63mm) through 4" (103mm)
Note: Length = 10 ft. (3.05M) with a tolerance of +/- .25 in. (6.35mm)
South Conduit Rigid is UL listed to UL-6.
It is manufactured in accordance with ANSI C80.1
and federal specification WW-C-581.
South Conduit Rigid is recognized as an
equipment grounding conductor by NEC article 250.